Graffiti removed.
Surface untouched.
Our 3000W laser vaporises spray paint off brick, concrete, render and metal. There's no chemical stripper, no pressure washer and no ghosting, and the surface underneath isn't damaged.
- No water
- No chemicals
- No blasting media
Get a fast quote
Tell us where the graffiti is and we'll come back with a price and turnaround.
Watch the laser clean the wall
Drag the line to compare. The laser lifts the paint layer and leaves the render and brick intact. No water, no chemicals, no blasting media.
What we clean
One process, six problems. If it's on a hard surface and shouldn't be, there's a good chance the laser lifts it without touching what's underneath.
Lead service
Graffiti removal
Tags, throw-ups and murals stripped from brick, render, concrete, metal and painted surfaces, back to a clean, uniform finish with no grinding scars or blast pitting. Suited to repeat-hit sites that need fast, repeatable turnaround.
Mould & biological growth
Lifted from render, masonry, concrete and tile without spreading spores or leaving bleach residue behind.
Soot & fire damage
Smoke staining removed from brick, stone, steel and concrete ahead of repainting or recoating.
Rust & corrosion
Steel structures, handrails, tanks and plant stripped back to bare metal ahead of recoating.
Paint & coating removal
Old paint, line-marking and failed coatings stripped as surface prep before repainting or protective coating works.
Heritage & stone restoration
Sandstone, sculpture and heritage-listed facades cleaned without the erosion risk of sandblasting or acid washing.
Not sure it fits one of these?
Send a photo of the surface and we'll tell you if laser cleaning is the right call.
Reference photography shown above, illustrating each contaminant type, not completed CLS jobs. Project photos to follow.
How laser cleaning works
Every job runs the same four stages, whether it's one wall or a full facade.
Site assessment
Substrate, contaminant and access surveyed on site to confirm the job is suited to laser cleaning.
Test patch
A small area is cleaned first to confirm the finish and settings before committing to the full surface.
Laser ablation
The laser beam vaporises the contaminant layer; the resulting dust is captured by filtered extraction as we go.
Inspection & sign-off
The cleaned surface is checked against the agreed finish and handed back, with no wet surfaces, no residue to clean up.
The laser's energy is absorbed by the dark, contaminated top layer far more readily than by the substrate beneath it. That layer heats, vaporises and lifts away as fine particulate. The clean surface underneath simply doesn't absorb enough energy to be affected, which is why the process can strip graffiti off render without touching the render itself.
Laser vs. the usual methods
Sandblasting, chemical stripping and pressure washing all remove surface contamination, each with a trade-off laser cleaning is built to avoid.
Swipe to compare
| Laser cleaning | Sandblasting | Chemical stripping | Pressure washing | |
|---|---|---|---|---|
| Water / runoff | None | None | Contaminated rinse water | High volume, needs containment |
| Chemicals | None | None | Strippers & neutralisers | Sometimes, for stubborn marks |
| Surface damage risk | Low, self-limiting on the substrate | High, pitting, profile loss | Moderate, can etch or discolour | Moderate, can erode soft masonry |
| Waste generated | Fine dust, filtered on the spot | Spent media + stripped material | Liquid chemical waste | Contaminated water & run-off |
| Precision / control | High, targets the contaminant layer | Low, broad, hard to feather | Low, dwell time is hard to control | Low, pressure is blunt |
| Site cleanup after | Minimal | Significant | Significant | Significant |
Built around one process, applied properly
Commercial Laser Solutions is a Sydney-based laser cleaning service specialising in graffiti, mould, soot, rust and coating removal for commercial, strata and government sites. We run continuous-wave laser cleaning equipment as the core of what we do, rather than as one tool among many, so every job gets set up, test-patched and run by people who work with the process daily.
Every job starts with a test patch on a discreet area of the actual surface, so you see the finish before it's committed to the whole site. That applies equally to a single tagged wall and to a full facade.
View our capability statementService area
Based in Smithfield, servicing greater Sydney and surrounding NSW.
- Councils & public land
- Strata & body corporate
- Facilities managers
- Builders & head contractors
- Industrial & manufacturing
- Heritage & government sites
Will laser cleaning damage my wall or surface?
Laser cleaning is designed to leave the surface intact. The laser's energy is absorbed by the dark contaminant layer far more readily than by the clean substrate underneath, so the graffiti, soot or coating lifts away while the brick, render, stone or metal isn't affected. Every job also starts with a test patch on a discreet area so you can see the finish before we do the full surface.
What surfaces can you clean?
Brick, render, concrete, sandstone and other natural stone, tile, steel and other metals, and painted surfaces. If you're not sure about your surface, send us a photo and we'll tell you whether laser cleaning is the right call.
Do you use water or chemicals?
No. It's a dry process with no chemical strippers and no abrasive blasting media. The contaminant is vaporised into fine dust, which is captured by filtered extraction as we work, so there's no runoff to contain and minimal clean-up afterwards.
Is it safe for heritage buildings and sandstone?
Yes, heritage and stone restoration is one of our core services. Laser cleaning avoids the erosion risk of sandblasting and acid washing, which makes it well suited to sandstone, sculpture and heritage-listed facades.
Do you need to visit the site before quoting?
Most jobs can be scoped without a site visit. Send us the address, a description or photo of the surface and contaminant, and a rough size of the area, and we'll come back with a price and turnaround.
Where do you work?
We're based in Smithfield and service greater Sydney and surrounding NSW, working with councils, strata and body corporates, facilities managers, builders and head contractors, industrial sites, and heritage and government sites.
How do I get a quote?
Fill in the quote form on this page or call us on 02 9632 3914. Include the address, the surface type, what needs removing and roughly how big the area is.
Send us the surface. We'll tell you what it takes to clean it.
Call with an address and a description of the surface and contaminant, or send the details through the form. Most jobs can be scoped without a site visit.
Smithfield NSW 2164